Passa al contenuto principale

Ultime notizie

Adesivi Skoda Club disponibili, per maggiori informazioni clicca qui
Topic: OBD ELEVEN (Letto 11370 volte) Topic precedente - Topic seguente
0 Utenti e 1 Visitatore stanno visualizzando questo topic.

OBD ELEVEN

Da qualche giorno ho l'OBD11 , a parte le codifiche da App, sto approcciando il long coding, mi sto informando da tutti i parenti del gruppo VW per avere info sulle procedure ed ho gia recuperato una buona lista di cosette interessanti......qui di seguito posto la procedura per attivare l'antifurto perimetrale ( per coloro che come me non hanno l'antifurto)

Testato e funzionante su Skoda octavia G-TEC my 2016

Attivazione clacson come allarme in caso di aperture porte, cofano o baule con macchina chiusa

Module 09 (Central Electrics)
Security access -> 31347
Extended coding (bytes)
- Byte 12 -> Activate Bit 0 (Anti-theft system installed / active)
Adaptation
Submenu - Anti-theft device
- DWA Alarmverzoegerung -> Driver door contact thatcham
- DWA Camper Modus -> active
- Ueberwachung Innenentriegelungshelbel -> active
- Akustischer Alarm Signalhorn -> active
- SirenenAlarmzahl -> Scegliere 1 o 10 ( numero di clacsonate)
Adaptation
Submenu - Acknowledgement Signals
- Akustische Rueckmeldung global -> active
- Akustische Rueckmeldung Signalhorn -> active

Dovete aspettare almeno 30 secondi perchè risulti attivo.
Per provarlo o vi chiudete dentro con il telecomando, o chiudete la macchina da fuori con un finestrino giù, appena aprirete una portiera il clacson inizierà a suonare e le frecce a lampeggiare, per spegnerlo basta spingere il tasto apri del telecomando.

A questo proposito invito tutti a postare le proprie esperienze una volta che sono state testate

Re:OBD ELEVEN

Risposta n. 1
Io ho attivato tutto quello che si puo' con le app,le uniche cose che non mi accetta sono hill holder e frecce confort da 3 a 5,octavia my 2015

Re:OBD ELEVEN

Risposta n. 2
hai provato con app o long coding?

Re:OBD ELEVEN

Risposta n. 3
Con app,ho OBD 11 standard

Re:OBD ELEVEN

Risposta n. 4
Io ho attivato tutto quello che si puo' con le app,le uniche cose che non mi accetta sono hill holder e frecce confort da 3 a 5,octavia my 2015
Ho rinunciato all'Hill Holder anch'io (Octavia My 2015 Elegance) ma per le frecce ha funzionato. Hai provato a fare il reset nell'infontainment? Io ho dovuto farlo e poi ha funzionato.
Diversamente, ho provato ad attivare le luci diurne DIMM all'accenzione delle frecce (fari alogeni) ma non è andato. A te?

@Ivanpgt Ti andrebbe di postare tutte le codifiche oltre app che hai recuperato?

Re:OBD ELEVEN

Risposta n. 5
Attivare i comandi dei finestrini e del tettuccio anche dopo aver aperto la porta                        
 lato guida senza chiave inserita   
                     
                        
Module 09 (Central Electrics)                        
Security access -> 31347                        
Adaptation                        
Submenu - ZV Komfort                        
- Freigabenachlauf FH bei Tueroeffnen abbrechen -> not active                        
                        
Togliere il suono quando si apre la porta del guidatore e la chiave rimane nel quadro (Anche in App)                        
                        
Module 17 Instruments                        
Security Access > 25327                        
Adaptation                        
Submenu - Ignition active message: Trigger                        
Change to "No display" (default value: driver's door)                        
                        
Avviso di rimozione chiave (quando spegnete la macchina, se aprite lo sportello                         
 senza rimuovere la chiave la macchina vi ricorda di sflilarla)   
                     
                        
Module 17 Instruments                        
Security Access > 25327                        
Extended coding (bytes)                        
- Byte 1 -> Activate Bit 4 (Key Ignition Warning)                        
                        
Accensione fissa quadro strumenti con luci di posizione                        
 (il sensore di luminosità degli strumenti funziona solo con le luci su posizione 0)   
                     
                        
Module 17 Instruments                        
Security Access > 25327                        
Adaptation                        
Submenu - Illumination_algorithm-Scale_switching_algorithm -> lds (default parking_light)                        
                        
Disattivazione Start & Stop                        
                        
Module 19                        
Security Access > 20103                        
Adaptation                        
Submenu - Start/stop start voltage limit -> 12 V (Default 7.6 V)                        
                        
Lampeggio fendinebbia insieme agli abbaglianti                        
                        
Module 09 (Central Electrics)                        
Security access -> 31347                        
Adaptation (Fendinebbia sinistro)                        
Submenu - Leuchte12NL LB45 Lichtfunktion C 12 “not active” > Nebellicht links                        
Submenu - Leuchte12NL LB45 Lichtfunktion D 12 “not active” > Lichthupe generell                        
Submenu - Leuchte12NL LB45 Dimmwert CD 12 “0” > "100" (con 127 non cambia)                        
Submenu - Leuchte12NL LB45 Dimming Direction CD 12 “maximize”                        
Adaptation (Fendinebbia destro)                        
Submenu - Leuchte13NL RB5 Lichtfunktion C 13 “not active” > Nebellicht rechts                        
Submenu - Leuchte13NL RB5 Lichtfunktion D 13 “not active” > Lichthupe generell                        
Submenu - Leuchte13NL RB5 Dimmwert CD 13 “0” > "100" (con 127 non cambia)                        
Submenu - Leuchte13NL RB5 Dimming direction CD 13 “maximize”                        
                        
Adaptation (Fendinebbia accesi fissi insieme agli abbaglianti non solo per lampeggio)                        
Submenu - Leuchte12NL LB45 Lichtfunktion C 12 > "not active" > “left high beam”                        
Submenu - Leuchte13NL RB5 Lichtfunktion C 13 > "not active" > “right high beam”                        
                        
Spegnimento automatico luci diurne quando si inserisce il freno a mano                        
                        
Module 09 (Central Electrics)                        
Security access -> 31347                        
Adaptation                        
Submenu - Aussenlicht_Front                        
- Tagfahrlicht Dauerfahrlicht bei Handbremse abschalten -> "active"                        
                        
                        
                        
high brake intensity light                        
                        
STG 09- Central electrics                        
Search for Dyn. turn signal modes                        
                        
Select Notwarn_blinken_NBA_Phase_2 > Set to "active" (factory default "not active")                        
Select Crashblinken > Set to "active" (factory default "not active")                        
Must be travelling more than a set speed (100 Kms/hr?), then brake hard!                        
                        
                        
                        
High intensity brake light (hazards flash with hard braking)                        
09 - Central Electronics                        
Adaptation - 10                        
(1)-Assistance light functions-Notbremsanzeige NBA -> "active" (default "not active")                        
(11)-Dyn. turn signal modes-Notwarn_blinken_NBA_Phase_2 -> "active"                        
(15)-Dyn. turn signal modes-Crashblinken -> "active"                        
                        
                     
                        
                        
                        
High intensity brake light (hazards flash with hard braking)                        
09 - Central Electronics                        
Adaptation - 10                        
(1)-Assistance light functions-Notbremsanzeige NBA -> "active" (default "not active")                        
(11)-Dyn. turn signal modes-Notwarn_blinken_NBA_Phase_2 -> "active"                        
(15)-Dyn. turn signal modes-Crashblinken -> "active"                        
                        
High intensity brake light operates on both inner and outer lights                        
09 - Central Electronics                        
Adaptation - 10                        
(8)-Leuchte27NSL RC6-Lichtfunktion C 27 -> "Brake light on" (default "not active")                        
(10)-Leuchte27NSL RC6-Dimmwert CD 27 -> "100" (default "0")                        
                        
                        
                        
                        
High intensity brake light operates on both inner and outer lights                        
                        
1. After you connect to the dongle, select Central Electrics control module (it has 09 in the yellow circle)                        
2. Scroll down the screen and select Security access                        
3. Enter the magic number 31347                         
4. Select Adaptation from the main screen                        
5. Enter "HRA65" into the search line and select Leuchte24SL HRA65 (this is the "Leuchte-set" for the right-side parking light inner tail)                        
6. From the list displayed, select Lichtfunktion B 24. The default setting for this adaptation channel should be not active                        
7. Only if the setting is not active, change the value to Bremslicht (Brake light) and press ok.                        
8. Press the green tick tag to accept the change                        
9. Go back to the main screen that shows the  list of Adaptation channels                        
10. Enter "HLC10" into the search line and select Leuchte23SL HLC10 (this is the "Leuchte-set" for the left-side parking light inner tail)                        
11. From the list displayed, select Lichtfunktion B 23 . The default setting for this adaptation channel should be not active                        
12. Only if the setting is not active, change the value to Bremslicht (Brake light) and press ok.                        
13. Press the green tick tag to accept the change                        
14. Exit the OBD11 software                        


Su quest'ultimo topic ho tirato giu diverse soluzioni.
Faccio notare che tutte queste procedure non le ho testate personalmente , man mano che le provo le postero' come funzionanti....se qualcuno volesse fare lo stesso sarebbe gradito.....(specificando anche su che modello sono state testate)

Re:OBD ELEVEN

Risposta n. 6
Ottimo...sarebbe utilissimo infatti segnare quelle funzionanti e su quale modello sono state attivate,specie modello 2013-2017 e >2017 dato che alcune sono differenti..un'informazione..ma se si sbaglia o non funziona la codifica lunga,è possibile ritornare a quella precedente in automatico o c'è un qualche salvataggio fatto da obdeleven?

Re:OBD ELEVEN

Risposta n. 7
in teoria se fai cose strane non dovrebbe accettarle....comunque nel PRO hai la storica delle modifiche cosi da poter tornare indietro..........ma ad oggi non ho ancora la pratica sufficiente pe poter dare dritte ad altri....datemi qualche giorno... (rofl)

Re:OBD ELEVEN

Risposta n. 8
Idem per me...  ;)

Re:OBD ELEVEN

Risposta n. 9
Avviso di rimozione chiave (quando spegnete la macchina, se aprite lo sportello                        
 senza rimuovere la chiave la macchina vi ricorda di sflilarla)    
                  
                       
Module 17 Instruments                       
Security Access > 25327                       
Extended coding (bytes)                       
- Byte 1 -> Activate Bit 4 (Key Ignition Warning)     

Testato e Funzionante    Octavia my 2016

Re:OBD ELEVEN

Risposta n. 10
Ragazzi sto iniziando ad amarvi!!!

Re:OBD ELEVEN

Risposta n. 11
ho fatto la modifica dello start and stop.....tra un po' dovro usare la macchina cosi vedro se funziona....


stavo provando altre cose ma nel modulo 9 sotto adaptation non trovo il sottomenu "ZV Konfort"  e nel modulo 17 , sempre sotto adaptation non trovo il il sottomenu "ignition active message: trigger"
mistero della fede

Re:OBD ELEVEN

Risposta n. 12
Start and stop: procedura effettuata e provata. Perfettamente funzionante!

Re:OBD ELEVEN

Risposta n. 13
Disattivazione Start & Stop                       
                       
Module 19                       
Security Access > 20103                       
Adaptation                       
Submenu - Start/stop start voltage limit -> 12 V (Default 7.6 V)   

Provata e funzionante
Il tasto fisico rimane spento come se fosse attivo , sul MaxiDot da fermo compare il simbolo come se si attivasse ma in effetti non si attiva


PS Qualcuno ha provato da App l' High intensity brake light ? Se si è andato a buon fine?

Re:OBD ELEVEN

Risposta n. 14
Onestamente no perchè non mi interessa... Oltre all'Hill Older, che non va, ho provato l'app relativa alle luci diurne in caso di utilizzo degli indicatori di direzione. Mi interessava ridurne l'intensità (DIMM) ma non funziona